Find a Service Center
- Series YE Radially Assembled Retaining Ring
- 0.062 in Shaft Size
- 0.02 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Inch/Metric | Inch |
| Groove Depth | 0.005 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 7 lbf |
| Package Type | Stacked |
| Tape Width | 3/8 in |
| Clearance Installed in Groove | 0.2 in |
| Shaft Dia. | 0.062 in |
| Tape Length of Stack | 5 in |
| Type | Radially Assembled |
| Thrust Ring Safety Factor of 3 Pr Lb | 41 lbf |
| Tape Rings Stack | 500 |
| RPM Limit | 40000 rpm |
| Series | YE |
| Plating | Phosphate |
| Material | Carbon Steel |
| Thickness | 0.02 in |
| Finish | Phosphate |
| Load Capacity [Max] | 40 lbs |
| Limiting Speed | 40000 rpm |
| Edge Margin | 0.01 in |
| Outside Dia. | 0.187 in |
| Length of Stack | 5 in |
| Weight | 0.002 LB |
| EAN or UPC | 721717000779 |
