Find a Service Center
- 1 in Shaft Diameter
- 1.851 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.25 in |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Temperature Range [Min] | -65 °F |
| Shaft Dia. | 1 in |
| Seal Width | 0.25 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Construction | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Application | General Purpose |
| Surface Speed [Nom] | 1,179 ft/min |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 1.851 in |
| Operating Temperature [Max] | 210 °F |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 225 °F |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case |
| Inch/Metric | Inch |
| Design | CRW1 |
| Weight | 0.082 LB |
| EAN or UPC | 85311008495 |
