Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 2 in |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Seal Type | Oil |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Overall Width | 0.25 in |
| Spring Material | Carbon Steel Garter |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Width | 0.25 in |
| Construction | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Case Design | Metal Case |
| Installation | Housing Press Fit |
| Shaft Dia. | 1 in |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Lip Type | Single Lip |
| Temperature Range [Min] | -65 °F |
| Weight | 0.054 LB |
| EAN or UPC | 85311008570 |
