Find a Service Center
- 1.063 in Shaft Diameter
- 1.983 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRW1 |
| Spring Material | Carbon Steel |
| Seal Width | 0.25 in |
| Temperature Range [Min] | -65 °F |
| Installation | Housing Press Fit |
| Inch/Metric | Inch |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Spring Type | Garter |
| Case Material | Steel |
| Surface Speed [Nom] | 1,253 ft/min |
| Speed | 0.07 ft/min |
| Overall Width | 0.25 in |
| Lip Style | Internal |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Design | CRW1 |
| Housing Bore Dia. | 1.983 in |
| Case Construction | Steel Case w/o Inner Case |
| Family Name | Single Lip With Spring Shaft Seal |
| Lubricant | Oil or Grease |
| Shaft Dia. | 1.063 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Pressure | 10 psi |
| Bore Sealant | Bore Tite |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Seal Design | SKF Wave |
| Weight | 0.088 LB |
| EAN or UPC | 85311009041 |
| NSN Number | 3020-01-184-4378 |
