Find a Service Center
- 1.1 in Shaft Diameter
- 1.67 in Housing Bore Diameter
- 0.31 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Overall Width | 8 mm |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.05 ft/min |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 250 °F |
| Case Design | Rubber Outside Diameter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Type | Grease |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Metric |
| Solid | Yes |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Design | HMS4 |
| Lip Type | Single Lip |
| Construction | HMS4 |
| Seal Application | General Purpose |
| Case Construction | Rubber Covered Steel Case |
| Shaft Dia. | 28 mm |
| Pressure | 7 psi |
| Housing Bore Dia. | 42.5 mm |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Seal Design | Standard |
| Weight | 0.04 LB |
| EAN or UPC | 85311884228 |
