Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.499 in Housing Bore
- 0.188 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 225 °F |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 1.499 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Design | CRW1 |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Inch/Metric | Inch |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Family Name | Single Lip With Spring Shaft Seal |
| Overall Width | 0.188 in |
| Construction | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Seal Width | 0.188 in |
| Shaft Dia. | 1.125 in |
| Surface Speed [Nom] | 1,326 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Temperature Range [Min] | -65 °F |
| Case Design | Metal Case |
| Lip Type | Single Lip |
| Weight | 0.048 LB |
| EAN or UPC | 85311009355 |
