Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Solid | Yes |
| Design | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Housing Bore Dia. | 1.752 in |
| Seal Type | Oil |
| Operating Temperature [Max] | 210 °F |
| Bore Sealant | Bore Tite |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Spring Type | Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Case Material | Steel |
| Case Design | Metal Case |
| Inch/Metric | Inch |
| Overall Width | 0.25 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Width | 0.25 in |
| Seal Application | General Purpose |
| Shaft Dia. | 1.125 in |
| Weight | 0.035 LB |
| EAN or UPC | 85311009546 |
