Find a Service Center
- 1.188 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Seal Width | 0.25 in |
| Spring Material | Carbon Steel |
| Installation | Housing Press Fit |
| Case Material | Steel |
| Construction | CRW1 |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Bore Sealant | Bore Tite |
| Overall Width | 0.25 in |
| Lubricant | Oil or Grease |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Surface Speed [Nom] | 1,401 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Spring Type | Garter |
| Housing Bore Dia. | 2 in |
| Case Design | Metal Case |
| Shaft Dia. | 1.188 in |
| Design | CRW1 |
| Weight | 0.04 LB |
| EAN or UPC | 85311010610 |
