Find a Service Center
Alternate Products
- 1.188 in Shaft Diameter
- 2.125 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 1,401 ft/min |
| Inch/Metric | Inch |
| Bore Sealant | Bore Tite |
| Temperature Range [Min] | -65 °F |
| Spring Material | Carbon Steel |
| Speed | 0.07 ft/min |
| Operating Temperature [Min] | -40 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Construction | Steel Case w/o Inner Case |
| Seal Width | 0.313 in |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Spring Type | Garter |
| Case Material | Steel |
| Lip Style | Internal |
| Case Design | Metal Case |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Seal Design | SKF Wave |
| Solid | Yes |
| Shaft Dia. | 1.188 in |
| Overall Width | 0.313 in |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Installation | Housing Press Fit |
| Seal Type | Oil |
| Operating Temperature [Max] | 210 °F |
| Design | CRW1 |
| Housing Bore Dia. | 2.125 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.088 LB |
| EAN or UPC | 85311010733 |
| NSN Number | 5330-00-580-8529 |
