Find a Service Center
Alternate Products
- 1.25 in Shaft Diameter
- 1.625 in Housing Bore
- 0.188 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Surface Speed [Nom] | 1,474 ft/min |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Shaft Dia. | 1.25 in |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Overall Width | 0.188 in |
| Case Construction | Steel Case w/o Inner Case |
| Solid | Yes |
| Seal Width | 0.188 in |
| Case Design | Metal Case |
| Seal Type | Oil |
| Temperature Range [Min] | -65 °F |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 1.625 in |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Design | CRW1 |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Weight | 0.034 LB |
| EAN or UPC | 85311010863 |
