Find a Service Center
Alternate Products
- 1.25 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/o Inner Case |
| Solid | Yes |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Seal Width | 0.25 in |
| Overall Width | 0.25 in |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 1.25 in |
| Lip Type | Single Lip |
| Family Name | Single Lip With Spring Shaft Seal |
| Inch/Metric | Inch |
| Surface Speed [Nom] | 1,474 ft/min |
| Case Design | Metal Case |
| Housing Bore Dia. | 1.752 in |
| Construction | CRW1 |
| Weight | 0.031 LB |
| EAN or UPC | 85311011006 |
