Find a Service Center
Alternate Products
- 1.375 in Shaft Diameter
- 1.983 in Housing Bore
- 0.313 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.313 in |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Family Name | Single Lip With Spring Shaft Seal |
| Operating Temperature [Min] | -40 °F |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 302 °F |
| Construction | CRW1 |
| Seal Width | 0.313 in |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 1,621 ft/min |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Housing Bore Dia. | 1.983 in |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Shaft Dia. | 1.375 in |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Max] | 300 °F |
| Design | CRW1 |
| Solid | Yes |
| Weight | 0.04 LB |
| EAN or UPC | 85311012614 |
