Find a Service Center
Alternate Products
- 1.438 in Shaft Diameter
- 2.623 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Bore Sealant | Bore Tite |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Case Material | Steel |
| Spring Type | Garter |
| Pressure | 10 psi |
| Seal Type | Oil |
| Operating Temperature [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Family Name | Single Lip With Spring Shaft Seal |
| Temperature Range [Min] | -65 °F |
| Case Construction | Steel Case w/o Inner Case |
| Construction | CRW1 |
| Seal Width | 0.313 in |
| Spring Material | Carbon Steel |
| Case Design | Metal Case |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 2.623 in |
| Shaft Dia. | 1.438 in |
| Lubricant | Oil or Grease |
| Weight | 0.095 LB |
| EAN or UPC | 85311014151 |
