Find a Service Center
- 0.25 in Shaft Diameter
- 0.626 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Grease Seal
description
- The GEARWRENCH engine cylinder flex-hones are easy to use with a variable-speed 3/8" hand drill and require no extra setup. Available in 3 sizes, the flex-hones will provide a smooth finish for cylinders from 3-1/4 to 4-1/8" in diameter. The durable 120 grit hones will provide a smooth finish in excess of 1000 engine cylinders.
applications
- Install with lip facing outward for maximum dirt exclusion
- Conveyor rollers and vehicle wheels
features
- Heavy-duty hone engine cylinders, 2-3/4" to 4-1/2" and 70mm to 114mm in diameter
- Deliver the same plateaued finish as the standard-duty, but are longer lasting
- Each abrasive globule is attached to high density nylon filament to enhance durability
- Produces a controlled surface condition unobtainable by any other method
- A high percentage plateaued surface is produced free of cut, torn or folded metal
- Provides the perfect surface finish without distortion
caution
- Not generally for oil retention
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 0.25 in |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Type | Grease |
| Housing Bore Dia. | 0.626 in |
| Seal Width | 0.25 in |
| Seal Design | Grease Seal |
| Lubricant | Grease |
| Case Design | Metal Case |
| Solid | Yes |
| Spring Material | None |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 210 °F |
| Overall Width | 0.25 in |
| Case Material | Steel |
| Pressure | 3 psi |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Design | HM14 |
| Speed | 0.02 ft/min |
| Construction | HM14 |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.201 LB |
| EAN or UPC | 85311522991 |
