Skip to content Skip to navigation menu



Item #100916058
    Shipment Options

Product details

  • 0.1880" Shaft Diameter
  • 0.428" Housing Bore Diameter
  • 0.120" Width
  • Nitrile
  • Type VR1


  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.


  • Will run against case of seal or housing
  • Hand fitted, no housing required
  • Seals for dirt exclusion


Shaft Dia. 0.188 in
Shoulder Width 0.428 in
Seal Material Nitrile Rubber (NBR)
Shaft Dia. [Min] 0.18 in, 4.5 mm
Operating Temperature [Min] -40 °F
Spring Material None
Seal Application Dirt Exclusion
Construction VR1
Lip Style External
Case Construction All Rubber
Cross Section 0.12 in, 3 mm
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Temperature Range [Max] 225 °F
Pressure 10 psi
Shaft Dia. [Max] 0.22 in, 5.5 mm
I.D. 0.16 in, 4 mm
Lip Type Face Seal
Pressure Differential [Max] 4.35 psi
Pressure [Max] 10 psi
Seal Design Molded Design
Surface Speed [Nom] 1,600 ft/min
Installation Streched On Shaft
Inch/Metric Metric
Temperature Range [Min] -40 °F
Overall Width 0.09 in, 3.7 mm
Lip Material Nitrile
Operating Temperature [Max] 210 °F
Cover/Compensation Ring/Plate Required No
Weight 0.052 LB
EAN or UPC 85311043700
Close Compare List Open Compare List Toggle

Product Comparison