Skip to content Skip to navigation menu
V-Ring Seal

400060

V-Ring Seal
Item #100916062
  • 0.09 in Overall Width
  • 0.22 in Minimum Shaft Diameter
  • 0.26 in Maximum Shaft Diameter
  • Nitrile Rubber (NBR) Seal Material
  • Metric
V-Ring Seal
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 0.09 in Overall Width
  • 0.22 in Minimum Shaft Diameter
  • 0.26 in Maximum Shaft Diameter
  • Nitrile Rubber (NBR) Seal Material
  • Metric

description

  • V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR1 design includes a standard cross section with a straight back side face. Being the most common type of V-rings, VR1 seals are typically used to protect bearing arrangements in gearboxes, electric motors and drives.

features

  • Easy to install
  • Cost-effective
  • Reliable contamination exclusion
  • If not in stock alternatives can be produced by SKF SEAL JET systems
Pressure 10 psi
Seal Material Nitrile Rubber (NBR)
Seal Design Molded Design
Case Construction All Rubber
Operating Temperature [Min] -40 °F
Temperature Range [Min] -40 °F
Cover/Compensation Ring/Plate Required No
Lip Style External
On-Shaft Width 0.02 in, 2.4 mm
Lip Type Face Seal
Pressure [Max] 10 psi
Face Outer Diameter [MIN] 0.24 in, 6 mm
Shoulder Width 0.49 in
Temperature Range [Max] 225 °F
Inch/Metric Metric
Installation Streched On Shaft
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Shaft Dia. 0.25 in
Seal Application Dirt Exclusion
Operating Temperature [Max] 210 °F
Spring Material None
Fitted Width 0.02 in, 0.4 mm
Surface Speed [Nom] 1,600 ft/min
Pressure Differential [Max] 4.35 psi
Construction VR1
Lip Material NBR
Shaft Dia. [Min] 0.22 in, 5.5 mm
Overall Width 0.09 in, 3.7 mm
Width 0.118 in
Shaft Dia For Sleeve [Nom] 0.15 in, 6 mm
Cross Section 0.12 in, 3 mm
Design VR1
Shaft Dia. [Max] 0.26 in, 6.5 mm
I.D. 0.2 in, 5 mm
Solid Yes
Weight 0.033 LB
EAN or UPC 85311043748
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison