Skip to content Skip to navigation menu



Item #100748263
    Shipment Options

Product details

  • 2 1/2" Shaft Diameter
  • 3.090" Housing Bore Diameter
  • 0.430" Width
  • Nitrile
  • Type VR2


  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.


  • Seals for dirt exclusion
  • Will run against case of seal or housing
  • Hand fitted, no housing required


I.D. 2.28 in, 58 mm
Seal Material Nitrile Rubber (NBR)
Pressure 10 psi
Shoulder Width 3.09 in
Lip Style External
Cover/Compensation Ring/Plate Required No
Operating Temperature [Max] 210 °F
Lip Type Face Seal
Shaft Dia. 2.5 in
Lip Material Nitrile
Case Construction All Rubber
Overall Width 0.37 in, 13 mm
Pressure [Max] 10 psi
Installation Streched On Shaft
Shaft Dia. [Max] 2.68 in, 68 mm
Spring Material None
Temperature Range [Min] -40 °F
Inch/Metric Metric
Operating Temperature [Min] -40 °F
Construction VR2
Pressure Differential [Max] 4.35 psi
Cross Section 0.43 in, 11 mm
Seal Design Molded Design
Surface Speed [Nom] 1,600 ft/min
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Shaft Dia. [Min] 2.48 in, 63 mm
Temperature Range [Max] 225 °F
Seal Application Dirt Exclusion
Weight 0.045 LB
EAN or UPC 85311044622
Close Compare List Open Compare List Toggle

Product Comparison