Skip to content Skip to navigation menu



Item #100916137
    Shipment Options

Product details

  • 2 3/4" Shaft Diameter
  • 3.460" Housing Bore Diameter
  • 0.350" Width
  • V = Longlife (Fluoroelastomers) (Viton)
  • Type VR1


  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.


  • Seals for dirt exclusion
  • Will run against case of seal or housing
  • Hand fitted, no housing required


Seal Design Molded Design
Operating Temperature [Max] 390 °F
Inch/Metric Metric
Lip Style External
Surface Speed [Nom] 1,600 ft/min
Pressure Differential [Max] 4.35 psi
Shaft Dia. 2.75 in
Seal Application Dirt Exclusion
Pressure 10 psi
Temperature Range [Max] 400 °F
Temperature Range [Min] -40 °F
Lip Material V = Longlife (Fluoroelastomers) (Viton)
Case Construction All Rubber
I.D. 2.48 in, 63 mm
Shaft Dia. [Min] 2.68 in, 68 mm
Installation Streched On Shaft
Shoulder Width 3.46 in
Construction VR1
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Spring Material None
Cross Section 0.35 in, 9 mm
Pressure [Max] 10 psi
Lip Type Face Seal
Seal Material Fluoro Rubber (FKM)
Cover/Compensation Ring/Plate Required No
Operating Temperature [Min] -5 °F
Shaft Dia. [Max] 2.87 in, 73 mm
Overall Width 0.27 in, 11 mm
Weight 0.095 LB
EAN or UPC 85311044677
Close Compare List Open Compare List Toggle

Product Comparison