- 3 1/2" Shaft Diameter
- 4.210" Housing Bore Diameter
- 0.350" Width
- Nitrile
- Type VR1
description
- All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.
features
- Seals for dirt exclusion
- Will run against case of seal or housing
- Hand fitted, no housing required
Cross Section | 0.35 in, 9 mm |
Construction | VR1 |
Pressure Differential [Max] | 4.35 psi |
Spring Material | None |
Operating Temperature [Min] | -40 °F |
Operating Temperature [Max] | 210 °F |
Seal Application | Dirt Exclusion |
Pressure | 10 psi |
Shaft Dia. [Max] | 3.66 in, 93 mm |
Design | VR1 |
Seal Design | Molded Design |
Installation | Streched On Shaft |
Case Construction | All Rubber |
Lip Type | Face Seal |
I.D. | 3.19 in, 81 mm |
Misalignment & Runout (In. @ Feet Per Minute) | 1-4 ° @2400, 5 ° @3000 |
Lip Material | Nitrile |
Cover/Compensation Ring/Plate Required | No |
Shaft Dia. [Min] | 3.46 in, 88 mm |
Lip Style | External |
Temperature Range [Min] | -40 °F |
Seal Material | Nitrile Rubber (NBR) |
Inch/Metric | Metric |
Shaft Dia. | 3.5 in |
Shoulder Width | 4.21 in |
Temperature Range [Max] | 225 °F |
Pressure [Max] | 10 psi |
Overall Width | 0.27 in, 11 mm |
Weight | 0.25 LB |
EAN or UPC | 85311044813 |