- 5 1/8" Shaft Diameter
- 5.955" Housing Bore Diameter
- 0.410" Width
- Nitrile
- Type VR1
description
- All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.
features
- Seals for dirt exclusion
- Will run against case of seal or housing
- Hand fitted, no housing required
Operating Temperature [Min] | -40 °F |
Case Construction | All Rubber |
Cross Section | 0.41 in, 10.5 mm |
Pressure | 10 psi |
Installation | Streched On Shaft |
Pressure Differential [Max] | 4.35 psi |
I.D. | 4.61 in, 117 mm |
Seal Material | Nitrile Rubber (NBR) |
Temperature Range [Min] | -40 °F |
Surface Speed [Nom] | 1,600 ft/min |
Misalignment & Runout (In. @ Feet Per Minute) | 1-4 ° @2400, 5 ° @3000 |
Cover/Compensation Ring/Plate Required | No |
Lip Material | Nitrile |
Seal Application | Dirt Exclusion |
Pressure [Max] | 10 psi |
Design | VR1 |
Temperature Range [Max] | 225 °F |
Inch/Metric | Metric |
Lip Style | External |
Overall Width | 0.31 in, 12.8 mm |
Shaft Dia. | 5.125 in |
Shaft Dia. [Max] | 5.32 in, 135 mm |
Seal Design | Molded Design |
Spring Material | None |
Shoulder Width | 5.955 in |
Shaft Dia. [Min] | 4.92 in, 125 mm |
Construction | VR1 |
Operating Temperature [Max] | 210 °F |
Lip Type | Face Seal |
Weight | 1.11 LB |
EAN or UPC | 85311045032 |