Skip to content Skip to navigation menu



Item #100916174
    Shipment Options

Product details

  • 6 1/4" Shaft Diameter
  • 7.050" Housing Bore Diameter
  • 0.310" Width
  • Nitrile
  • Type VR3


  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.


  • Seals for dirt exclusion
  • Will run against case of seal or housing
  • Hand fitted, no housing required


Shaft Dia. 6.25 in
Seal Material Nitrile Rubber (NBR)
Temperature Range [Min] -40 °F
Seal Application Dirt Exclusion
Shaft Dia. [Max] 6.5 in, 165 mm
Seal Design Molded Design
Installation Streched On Shaft
Operating Temperature [Min] -40 °F
Spring Material None
Shaft Dia. [Min] 6.1 in, 155 mm
Pressure 10 psi
Lip Style External
Temperature Range [Max] 225 °F
Cover/Compensation Ring/Plate Required No
Design VR3
Lip Material Nitrile
Cross Section 0.31 in, 8 mm
Shoulder Width 7.05 in
Case Construction All Rubber
Inch/Metric Metric
Lip Type Face Seal
I.D. 5.67 in, 144 mm
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Pressure Differential [Max] 4.35 psi
Pressure [Max] 10 psi
Overall Width 0.24 in, 10.5 mm
Construction VR3
Operating Temperature [Max] 210 °F
Weight 0.268 LB
EAN or UPC 85311045216
Close Compare List Open Compare List Toggle

Product Comparison