Skip to content Skip to navigation menu



Item #100916216
    Shipment Options

Product details

  • 14 7/8" Shaft Diameter
  • 16.645" Housing Bore Diameter
  • 0.790" Width
  • Nitrile
  • Type VR1


  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.


  • Seals for dirt exclusion
  • Will run against case of seal or housing
  • Hand fitted, no housing required


Case Construction All Rubber
Shaft Dia. [Max] 15.35 in, 390 mm
Cover/Compensation Ring/Plate Required No
Seal Material Nitrile Rubber (NBR)
Pressure Differential [Max] 4.35 psi
Lip Style External
Shaft Dia. 14.875 in
Shaft Dia. [Min] 14.37 in, 365 mm
Seal Design Molded Design
Installation Streched On Shaft
I.D. 13.27 in, 337 mm
Spring Material None
Pressure [Max] 10 psi
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Seal Application Dirt Exclusion
Lip Type Face Seal
Temperature Range [Max] 225 °F
Operating Temperature [Max] 210 °F
Construction VR1
Overall Width 0.56 in, 25 mm
Lip Material Nitrile
Operating Temperature [Min] -40 °F
Temperature Range [Min] -40 °F
Inch/Metric Metric
Pressure 10 psi
Shoulder Width 16.645 in
Cross Section 0.79 in, 20 mm
Weight 1.494 LB
EAN or UPC 85311090292
Close Compare List Open Compare List Toggle

Product Comparison