Skip to content Skip to navigation menu



Item #100748298
    Shipment Options

Product details

  • 31 3/4" Shaft Diameter
  • 33.520" Housing Bore Diameter
  • 0.790" Width
  • Nitrile
  • Type VR1


  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.


  • Seals for dirt exclusion
  • Will run against case of seal or housing
  • Hand fitted, no housing required


Cover/Compensation Ring/Plate Required No
Pressure Differential [Max] 4.35 psi
Installation Streched On Shaft
Inch/Metric Metric
Pressure [Max] 10 psi
Lip Material Nitrile
Lip Style External
Lip Type Face Seal
Operating Temperature [Min] -40 °F
Spring Material None
Seal Application Dirt Exclusion
Temperature Range [Max] 225 °F
Case Construction All Rubber
Shaft Dia. 31.75 in
Shaft Dia. [Max] 32.68 in, 830 mm
Cross Section 0.79 in, 20 mm
Shaft Dia. [Min] 30.91 in, 785 mm
Seal Material Nitrile Rubber (NBR)
Construction VR1
Overall Width 0.56 in, 25 mm
Pressure 10 psi
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Shoulder Width 33.52 in
Surface Speed [Nom] 1,600 ft/min
I.D. 29.33 in, 745 mm
Seal Design Molded Design
Operating Temperature [Max] 210 °F
Temperature Range [Min] -40 °F
Weight 3.519 LB
EAN or UPC 85311090834
Close Compare List Open Compare List Toggle

Product Comparison