Find a Service Center
Alternate Products
- 4.625 in Shaft Diameter
- 5.751 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.5 in |
| Case Design | Metal Case, Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Width | 0.5 in |
| Lip Type | Single Lip |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.07 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Type | Oil |
| Solid | Yes |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 5.751 in |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 4.625 in |
| Case Construction | Steel Case w/Inner Case |
| Installation | Housing Press Fit |
| Construction | CRWH1 |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Pressure | 10 psi |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Design | CRWH1 |
| Weight | 0.454 LB |
| EAN or UPC | 85311036313 |
| NSN Number | 5330-01-269-7441 |
