Find a Service Center
Alternate Products
- 0.5 in Shaft Diameter
- 1.124 in Housing Bore
- 0.256 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.256 in |
| Surface Speed [Nom] | 590 ft/min |
| Operating Temperature [Max] | 210 °F |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Seal Width | 0.25 in |
| Shaft Dia. | 0.5 in |
| Design | CRW1 |
| Lip Type | Single Lip |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 1.124 in |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Speed | 0.07 ft/min |
| Weight | 0.022 LB |
| EAN or UPC | 85311003537 |
