Find a Service Center
Alternate Products
- 0.5 in Shaft Diameter
- 1.375 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Solid | Yes |
| Surface Speed [Nom] | 590 ft/min |
| Case Design | Metal Case |
| Spring Material | Carbon Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Speed | 0.07 ft/min |
| Spring Type | Garter |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Seal Type | Oil |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.375 in |
| Case Material | Steel |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Pressure | 10 psi |
| Bore Sealant | Bore Tite |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Overall Width | 0.25 in |
| Seal Width | 0.25 in |
| Design | CRW1 |
| Operating Temperature [Min] | -40 °F |
| Lip Type | Single Lip |
| Shaft Dia. | 0.5 in |
| Weight | 0.073 LB |
| EAN or UPC | 85311003599 |
