Find a Service Center
Alternate Products
- 5.75 in Shaft Diameter
- 7 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Housing Bore Dia. | 7 in |
| Solid | Yes |
| Overall Width | 0.5 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 5.75 in |
| Case Construction | Steel Case w/Inner Case |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Case Design | Metal Case, Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Type | Oil |
| Construction | CRWH1 |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Width | 0.5 in |
| Design | CRWH1 |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 3,600 ft/min |
| Weight | 0.596 LB |
| EAN or UPC | 85311038515 |
| NSN Number | 5330-00-154-8487 |
