Find a Service Center
Alternate Products
- 60 mm Shaft Diameter
- 75 mm Housing Bore
- 8 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 230 °F |
| Construction | CRW1 |
| Lip Style | Internal |
| Temperature Range [Min] | -22 °F |
| Shaft Dia. | 60 mm |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip w/Spring |
| Seal Width | 8 mm |
| Seal Type | Oil |
| Inch/Metric | Metric |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Housing Bore Dia. | 75 mm |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 2,785 ft/min |
| Spring Material | Carbon Steel Garter |
| Overall Width | 8 mm |
| Lip Material | Nitrile Rubber (NBR) |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.089 LB |
| EAN or UPC | 85311025683 |
