Find a Service Center
Alternate Products
- 0.688 in Shaft Diameter
- 1.124 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Design | CRW1 |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 1.124 in |
| Pressure | 10 psi |
| Lip Style | Internal |
| Seal Width | 0.25 in |
| Lip Material | Nitrile Rubber (NBR) |
| Shaft Dia. | 0.688 in |
| Lip Type | Single Lip |
| Spring Type | Garter |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case |
| Seal Design | SKF Wave |
| Solid | Yes |
| Bore Sealant | Bore Tite |
| Overall Width | 0.25 in |
| Case Material | Steel |
| Inch/Metric | Inch |
| Family Name | Single Lip With Spring Shaft Seal |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Min] | -65 °F |
| Construction | CRW1 |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 811 ft/min |
| Weight | 0.064 LB |
| EAN or UPC | 85311005029 |
