Find a Service Center
- 0.625 in Shaft Diameter
- 1.124 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Design | CRW1 |
| Housing Bore Dia. | 1.124 in |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Solid | Yes |
| Seal Width | 0.25 in |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Inch/Metric | Inch |
| Shaft Dia. | 0.625 in |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Overall Width | 0.25 in |
| Construction | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Speed | 0.07 ft/min |
| Operating Temperature [Min] | -40 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Weight | 0.243 LB |
| EAN or UPC | 85311454933 |
