Find a Service Center
- Deep Groove Bearing
- 2.95 in Inner Diameter
- 5.12 in Outer Diameter
- 0.98 in Width
- Bearing Steel Material
description
- Adapter type bearings, when used with adapter sleeves are designed for mounting on inch size shafting without machining the shaft. The tapered sleeve is drawn into the tapered bore of the bearing as the nut is tigntened. Soft steel sleeve adapts to the shaft and grips it tightly. Tapered bore of bearing is 1" to 1' (Included angle 4" 46' 19"). Adapter sleeve designation includes nut and lockwasher.
| Rows of Balls | Single |
| Contact Angle | 0° |
| Inch/Metric | Metric |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Grease |
| Fillet Radius | 1.5 mm |
| Cage Type | Metal |
| Outer Ring Width | 0.98 in, 25 mm |
| Material | Bearing Steel |
| Inner Ring Width | 0.98 in, 25 mm |
| Dynamic Load Rating | 14900 lbf |
| Internal Clearance | C3 |
| Capacity | Standard Capacity |
| Precision Rating | ABEC 1 |
| Snap Ring | No Snap Ring |
| Cage Material | Bearing Steel |
| Temperature Range [Max] | 250 °F |
| Bore Type | Tapered 1:12 |
| No. in Set | Single Bearing |
| Seal Material | Nitrile Rubber (NBR) |
| Static Load Rating [Max] | 11000 lbf |
| icNumber | 7701230 |
| I.D. | 2.95 in, 75 mm |
| Width | 0.98 in, 25 mm |
| Radial Internal Clearance | Normal |
| Preload Level | None |
| Series | 62 |
| Ball Material | Steel |
| Seal Type | Contacting Seal |
| Rolling Element | Ball |
| Temperature Range [Min] | -22 °F |
| Limiting Speed - Grease | 3200 rpm |
| Locking Device | No Locking Device |
| Row Type | 1 |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Cylindrical |
| Bearing Type | Deep Groove |
| Enclosure | Seal on Both Sides |
| Element Material | Bearing Steel |
| Origin | Single Row Radial |
| O.D. | 5.12 in, 130 mm |
| Weight | 2.489 LB |
| EAN or UPC | 97741005647 |
