Skip to content Skip to navigation menu
Single Row Cylindrical Bore Angular Contact Ball Bearing

7308PJDU

Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102146200
Single Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options

features

  • MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
  • 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
  • 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
  • ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
  • 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Radial Internal Clearance Normal
No. in Set Single Bearing
Seal Material None
Preload Level Light
Capacity Standard Capacity
Radial Internal Clearance Specification Normal Clearance
Ball Material Steel
Material Bearing Steel
Precision Rating ABEC 3
Dynamic Load Rating 49.4 kN
Cage Type Metal
O.D. Type Cylindrical
Internal Design Universal Mounting
Inner Ring Width 0.91 in, 23 mm
Seal Type Unsealed
Cage Sheet Metal
Static Load Rating [Max] 6860 lbf
No. of Bearings 1
Flush Ground Yes
I.D. 1.57 in, 40 mm
Row Type 1
Precision Standard
O.D. 3.54 in, 90 mm
Inch/Metric Metric
No. of Rows Single
icNumber 7695815
Enclosure Open
Temperature Range [Max] 450 °F
Rolling Element Ball
Fillet Radius 1.5 mm
Series 7300PJ
Origin Single Row Angular Contact
Limiting Speed - Oil 9500 rpm
Contact Angle 40 Degree
Duplex Type Single
Limiting Speed - Grease 7300 rpm
Width 0.91 in, 23 mm
Outer Ring Width 0.91 in, 23 mm
Bearing Type Unmounted, Angular Contact
Bore Type Cylindrical
Rows of Balls Single
Lubricant Oil Preservative
Ring Type Solid Inner Ring and Solid Outer Ring
Bearing Class Class 6 / P6
Element Material Bearing Steel
Cage Material Brass
Static Load Rating 33.5 kN
Precision Level Standard (ABEC 1)
Snap Ring No Snap Ring
Locking Device No Locking Device
Weight 1.541 LB
EAN or UPC 97741017497
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison