MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Precision
Standard
Precision Level
Standard (ABEC 1)
icNumber
7699061
Duplex Type
Single
Cage Material
Brass
No. of Rows
Single
Precision Rating
ABEC 1
Cage
Machined Metal
Radial Internal Clearance Specification
Normal Clearance
O.D. Type
Cylindrical
Rolling Element
Ball
Preload Level
Light
Limiting Speed - Oil
7500 rpm
Contact Angle
40 Degree
Bearing Type
Unmounted, Angular Contact
Limiting Speed - Grease
5800 rpm
Width
1.06 in, 27 mm
No. of Bearings
1
Lubricant
Oil Preservative
Rows of Balls
Single
Series
7300P
Origin
Single Row Angular Contact
Radial Internal Clearance
Normal
Seal Material
None
Internal Design
Universal Mounting
Ring Type
Solid Inner Ring and Solid Outer Ring
Element Material
Bearing Steel
Bearing Class
Normal / P0
Locking Device
No Locking Device
Material
Bearing Steel
Flush Ground
Yes
Outer Ring Width
1.14 in, 29 mm
O.D.
4.33 in, 110 mm
Ball Material
Steel
Enclosure
Open
Inch/Metric
Metric
Dynamic Load Rating
68.9 kN
Temperature Range [Max]
450 °F
Static Load Rating
52 kN
Inner Ring Width
1.14 in, 29 mm
Seal Type
Unsealed
Fillet Radius
2 mm
Row Type
1
Static Load Rating [Max]
11900 lbf
Cage Type
Metal
No. in Set
Duplex Set
Bore Type
Cylindrical
Snap Ring
No Snap Ring
I.D.
1.97 in, 50 mm
Capacity
Standard Capacity
Weight
2.815 LB
EAN or UPC
97741017589
We're here for you
with Service Centers across the country - We have your back