8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #101169062
each
features
MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Origin
Single Row Angular Contact
Bearing Type
Unmounted, Angular Contact
Series
7300P
Dynamic Load Rating
190 kN
Lubricant
Oil Preservative
Internal Design
Universal Mounting
Precision
Standard
Ball Material
Steel
Temperature Range [Max]
450 °F
Radial Internal Clearance
Normal
icNumber
7699069
Capacity
Standard Capacity
Duplex Type
Single
Limiting Speed - Oil
3900 rpm
Static Load Rating [Max]
41100 lbf
Radial Internal Clearance Specification
Normal Clearance
Cage Type
Metal
Fillet Radius
2.5 mm
No. in Set
Duplex Set
Bore Type
Cylindrical
No. of Rows
Single
No. of Bearings
1
Width
1.85 in, 47 mm
Cage Material
Brass
Limiting Speed - Grease
3000 rpm
Flush Ground
Yes
Seal Material
None
Static Load Rating
190 kN
Element Material
Bearing Steel
Rolling Element
Ball
Inch/Metric
Metric
I.D.
3.94 in, 100 mm
Ring Type
Solid Inner Ring and Solid Outer Ring
Precision Rating
ABEC 1
Contact Angle
40 Degree
O.D.
8.46 in, 215 mm
Rows of Balls
Single
Preload Level
Light
Snap Ring
No Snap Ring
Bearing Class
Normal / P0
Locking Device
No Locking Device
Outer Ring Width
1.85 in, 47 mm
Row Type
1
Seal Type
Unsealed
Inner Ring Width
1.85 in, 47 mm
Precision Level
Standard (ABEC 1)
Cage
Machined Metal
Material
Bearing Steel
Enclosure
Open
O.D. Type
Cylindrical
Weight
19.026 LB
EAN or UPC
97741018173
We're here for you
with Service Centers across the country - We have your back