MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Origin
Single Row Angular Contact
O.D. Type
Cylindrical
Bore Type
Cylindrical
Enclosure
Open
Rolling Element
Ball
No. of Bearings
1
Radial Internal Clearance
Normal
Inch/Metric
Metric
Contact Angle
40 Degree
Element Material
Bearing Steel
Bearing Class
Normal / P0
Cage Material
Brass
Seal Material
None
Temperature Range [Max]
450 °F
Preload Level
Light
Cage Type
Metal
Precision Rating
ABEC 1
Limiting Speed - Oil
3000 rpm
Flush Ground
Yes
Precision Level
Standard (ABEC 1)
Ball Material
Steel
Duplex Type
Single
Row Type
1
Fillet Radius
3 mm
Rows of Balls
Single
I.D.
5.12 in, 130 mm
Static Load Rating [Max]
71900 lbf
Snap Ring
No Snap Ring
Series
7300P
Inner Ring Width
2.28 in, 58 mm
Dynamic Load Rating
276 kN
icNumber
7699070
Radial Internal Clearance Specification
Normal Clearance
Bearing Type
Unmounted, Angular Contact
No. in Set
Duplex Set
Cage
Machined Metal
Internal Design
Universal Mounting
Limiting Speed - Grease
2300 rpm
Precision
Standard
O.D.
11.02 in, 280 mm
No. of Rows
Single
Static Load Rating
305 kN
Width
2.28 in, 58 mm
Outer Ring Width
2.28 in, 58 mm
Lubricant
Oil Preservative
Material
Bearing Steel
Seal Type
Unsealed
Ring Type
Solid Inner Ring and Solid Outer Ring
Capacity
Standard Capacity
Locking Device
No Locking Device
Weight
39.854 LB
EAN or UPC
97741018265
We're here for you
with Service Centers across the country - We have your back