MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
7400-PJ and PJD Series bearings are similar to the 7200-PJ and 7300-PH Series but are heavier sectioned and are used for very heavy thrust loads or combined radial and thrust loads where thrust is predominant.
Snap Ring
No Snap Ring
Dynamic Load Rating
216 kN
Material
Bearing Steel
Contact Angle
40 Degree
Static Load Rating
200 kN
Precision Rating
ABEC 3
Duplex Type
Single
O.D. Type
Cylindrical
Enclosure
Open
Rolling Element
Ball
Cage Type
Metal
icNumber
7695925
Limiting Speed - Oil
3500 rpm
Rows of Balls
Single
Ball Material
Steel
Seal Material
None
Bearing Type
Unmounted, Angular Contact
No. of Rows
Single
Static Load Rating [Max]
49500 lbf
Locking Device
No Locking Device
Row Type
1
Inch/Metric
Metric
Radial Internal Clearance
Normal
Precision Level
Standard (ABEC 1)
Lubricant
Oil Preservative
Fillet Radius
3 mm
Ring Type
Solid Inner Ring and Solid Outer Ring
Inner Ring Width
2.13 in, 54 mm
Seal Type
Unsealed
No. of Bearings
1
Flush Ground
Yes
Radial Internal Clearance Specification
Normal Clearance
Width
2.13 in, 54 mm
Series
7400PJ
O.D.
8.86 in, 225 mm
Outer Ring Width
2.13 in, 54 mm
Preload Level
Light
Capacity
Standard Capacity
Limiting Speed - Grease
2700 rpm
Cage Material
Brass
Element Material
Bearing Steel
Cage
Machined Metal
Internal Design
Universal Mounting
No. in Set
Single Bearing
Precision
Standard
I.D.
3.54 in, 90 mm
Temperature Range [Max]
450 °F
Bearing Class
Class 6 / P6
Bore Type
Cylindrical
Origin
Single Row Angular Contact
Weight
25.673 LB
EAN or UPC
97741018623
We're here for you
with Service Centers across the country - We have your back