Find a Service Center
- Radial Shaft Seal
- 102 mm Shaft Diameter
- 130 mm Housing Bore Diameter
- 13 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Seal Design | Standard |
| Seal Application | General Purpose |
| Housing Bore Dia. | 130 mm |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Overall Width | 13 mm |
| Shaft Dia. | 102 mm |
| Case Construction | Rubber Covered Steel Case |
| Lip Type | Single Lip w/Spring |
| Temperature Range [Max] | 250 °F |
| Construction | HMS4 |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Type | Grease |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Metric |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Pressure | 10 psi |
| Spring Material | Carbon Steel Garter |
| Weight | 0.443 LB |
| EAN or UPC | 85311167765 |
