Find a Service Center
Alternate Products
- 10 in Shaft Diameter
- 12 in Housing Bore Diameter
- 15 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Pressure | 10 psi |
| Design | CRWH1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Overall Width | 0.625 in |
| Construction | CRWH1 |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Solid | Yes |
| Case Design | Metal Case, Inner Case |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.07 ft/min |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 12.5 in |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 10.5 in |
| Lubricant | Oil or Grease |
| Weight | 2.17 LB |
| EAN or UPC | 85311043472 |
