Find a Service Center
Alternate Products
- 1.063 in Shaft Diameter
- 2.062 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Temperature Range [Min] | -65 °F |
| Pressure | 10 psi |
| Seal Type | Oil |
| Surface Speed [Nom] | 1,253 ft/min |
| Spring Type | Garter |
| Case Material | Steel |
| Overall Width | 0.25 in |
| Seal Application | General Purpose |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Shaft Dia. | 1.063 in |
| Design | CRW1 |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 2.062 in |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case |
| Bore Sealant | Bore Tite |
| Solid | Yes |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.093 LB |
| EAN or UPC | 85311009089 |
