Find a Service Center
Alternate Products
- 11 in Shaft Diameter
- 13 in Housing Bore Diameter
- 15 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 13 in |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Overall Width | 0.625 in |
| Installation | Housing Press Fit |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.07 ft/min |
| Operating Temperature [Min] | -40 °F |
| Lip Type | Single Lip |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Surface Speed [Nom] | 3,600 ft/min |
| Design | CRWH1 |
| Construction | CRWH1 |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Inch |
| Shaft Dia. | 11 in |
| Weight | 2.203 LB |
| EAN or UPC | 85311043533 |
