Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.561 in Housing Bore
- 0.25 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Solid | Yes |
| Housing Bore Dia. | 1.561 in |
| Case Construction | Steel Case w/o Inner Case |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel |
| Construction | CRW1 |
| Design | CRW1 |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 302 °F |
| Shaft Dia. | 1.125 in |
| Spring Type | Garter |
| Case Design | Metal Case |
| Temperature Range [Max] | 300 °F |
| Case Material | Steel |
| Overall Width | 0.25 in |
| Surface Speed [Nom] | 1,326 ft/min |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Weight | 0.071 LB |
| EAN or UPC | 85311009386 |
