Find a Service Center
- 1.188 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Shaft Dia. | 1.188 in |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 390 °F |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 400 °F |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Spring Material | Carbon Steel |
| Speed | 0.07 ft/min |
| Overall Width | 0.25 in |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Solid | Yes |
| Installation | Housing Press Fit |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Construction | CRW1 |
| Seal Application | General Purpose |
| Housing Bore Dia. | 1.752 in |
| Spring Type | Garter |
| Operating Temperature [Min] | -5 °F |
| Case Material | Steel |
| Design | CRW1 |
| Weight | 0.075 LB |
| EAN or UPC | 85311010528 |
