Find a Service Center
- 12 in Shaft Diameter
- 14 in Housing Bore
- 0.625 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Design | CRW1 |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Seal Application | General Purpose |
| Overall Width | 0.625 in |
| Case Construction | Steel Case w/o Inner Case |
| Construction | CRW1 |
| Housing Bore Dia. | 14 in |
| Surface Speed [Nom] | 3,600 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Case Design | Metal Case |
| Temperature Range [Min] | -65 °F |
| Shaft Dia. | 12 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Seal Type | Oil |
| Weight | 2.781 LB |
| EAN or UPC | 85311043601 |
