Find a Service Center
- 1.22 in Shaft Diameter
- 2.4 in Housing Bore Diameter
- 0.35 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Case Construction | Rubber Covered Steel Case |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -40 °F |
| Lip Type | Triple Lip |
| Shaft Dia. | 1.22 in, 30.99 mm |
| Housing Bore Dia. | 2.4 in, 61.01 mm |
| Inch/Metric | Metric |
| Operating Temperature [Max] | 210 °F |
| Case Design | Rubber Outside Diameter |
| Surface Speed [Nom] | 3,600 ft/min |
| Design | HMSA92S |
| Seal Design | Assembled Design |
| Operating Temperature [Min] | -40 °F |
| Seal Application | Light Dirt Exclusion |
| Construction | HMSA92S |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.35 in, 8.99 mm |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 250 °F |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Lip Style | Internal / External |
| Lip Material | Nitrile Rubber (NBR) |
| Temp Description | w/Axial Dirt Lip |
| Weight | 0.131 LB |
| EAN or UPC | 85311197717 |
