Find a Service Center
- 1.25 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Bore Sealant | Bore Tite |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Shaft Dia. | 1.25 in |
| Temperature Range [Min] | -40 °F |
| Construction | CRW1 |
| Overall Width | 0.25 in |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -5 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 1.752 in |
| Solid | Yes |
| Operating Temperature [Max] | 390 °F |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Spring Type | Garter |
| Speed | 0.07 ft/min |
| Design | CRW1 |
| Lubricant | Oil or Grease |
| Lip Style | Internal |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel |
| Case Material | Steel |
| Surface Speed [Nom] | 1,474 ft/min |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 400 °F |
| Weight | 0.075 LB |
| EAN or UPC | 85311010948 |
