Find a Service Center
- 1.25 in Shaft Diameter
- 1.874 in Housing Bore
- 0.25 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Solid | Yes |
| Overall Width | 0.25 in |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 300 °F |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Min] | -40 °F |
| Design | CRW1 |
| Lip Type | Single Lip |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Seal Type | Oil |
| Lip Style | Internal |
| Operating Temperature [Max] | 302 °F |
| Speed | 0.07 ft/min |
| Case Design | Metal Case |
| Shaft Dia. | 1.25 in |
| Housing Bore Dia. | 1.874 in |
| Case Construction | Steel Case w/o Inner Case |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Type | Garter |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Case Material | Steel |
| Weight | 0.077 LB |
| EAN or UPC | 85311011068 |
