Find a Service Center
Alternate Products
- 1.25 in Shaft Diameter
- 2.441 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Inch/Metric | Inch |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 2.441 in |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case |
| Case Construction | Steel Case w/o Inner Case |
| Solid | Yes |
| Overall Width | 0.25 in |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Temperature Range [Min] | -65 °F |
| Shaft Dia. | 1.25 in |
| Pressure | 10 psi |
| Weight | 0.089 LB |
| EAN or UPC | 85311011518 |
