Find a Service Center
Alternate Products
- 1.313 in Shaft Diameter
- 2.25 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Construction | CRW1 |
| Shaft Dia. | 1.313 in |
| Operating Temperature [Max] | 210 °F |
| Design | CRW1 |
| Temperature Range [Max] | 225 °F |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Overall Width | 0.313 in |
| Inch/Metric | Inch |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 1,548 ft/min |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Housing Bore Dia. | 2.25 in |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Weight | 0.049 LB |
| EAN or UPC | 85311012089 |
