Find a Service Center
Alternate Products
- 1.313 in Shaft Diameter
- 2.227 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 2.227 in |
| Temperature Range [Max] | 250 °F |
| Overall Width | 0.313 in |
| Pressure | 10 psi |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 1.313 in |
| Seal Design | SKF Wave |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRW1 |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Design | CRW1 |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Case Design | Metal Case |
| Weight | 0.057 LB |
| EAN or UPC | 85311012195 |
