Find a Service Center
- 1.375 in Shaft Diameter
- 2.25 in Housing Bore
- 0.313 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 302 °F |
| Speed | 0.07 ft/min |
| Bore Sealant | Bore Tite |
| Seal Type | Oil |
| Design | CRW1 |
| Solid | Yes |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel |
| Spring Type | Garter |
| Overall Width | 0.313 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 300 °F |
| Seal Application | General Purpose |
| Housing Bore Dia. | 2.25 in |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Shaft Dia. | 1.375 in |
| Construction | CRW1 |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Case Material | Steel |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Weight | 0.093 LB |
| EAN or UPC | 85311883986 |
